Pullman Holt GB1400E Průvodce řešením problémů stáhnout pdf (Strana 3)

FOR WET OPERATION:

With HEPA filter and water pick-up pan in place, securely clamp

motor head to the spacer. When the maximum water level in the

vacuum cleaner tank is reached the water pick-up pan’s safety valve

(float) closes off suction, automatically preventing further

liquid intake.

NOTE: This will cause the motor to race. Turn off motor, remove

and empty tank. Thoroughly clean float assembly.

Replace water pick-up adapter, HEPA filter and motor head, then

clamp securely. The vacuum cleaner is ready for wet use.

OPERATION

FOR DRY OPERATION:

With the HEPA Filter Assembly in place, the motor head securely

clamped,and the metal hose adapter connected to the inlet,plug the

power cable into the proper outlet. Select the appropriate hose,

wand and/or tool and connect to the tank inlet. The vacuum clean-

er is ready for dry use.

CAUTION

When removing the motor head,care in handling is essential. Dropping, banging or other abuse may result in poor vacuum seal and

a loss in suction power, and will invalidate your warranty.

Product Support: Contact Pullman-Holt at 800-237-7582

Sales Inquiries: Contact Sylvane at 800-934-9194 or visit sylvane.com

1 2 3 4 5 6

Žádné komentáře

Pullman Holt GB1400E Průvodce řešením problémů Strana 3